v0.1.31 (2016-03-09)

  • Sped-up memory reads & writes from/to the SDRAM.

v0.1.30 (2015-09-02)

  • Removed include in README.rst that caused an error generating the documentation.

v0.1.29 (2015-08-10)

  • Specifying the board model on the CLI utilities is now case-insensitive.

v0.1.28 (2015-08-09)

  • Now supports pyusb versions 1.0.0a and 1.0.0b.
  • The utilities only connect to the USB port when they are actively executing some function for the attached XESS board. This allows other utilities to access the board.
  • Added drag-and-drop capability for selecting bitstream and hex files.
  • A history of bitstream and hex files is maintained.
  • Exceptions caused by pyusb on program termination are now caught and filtered out.

v0.1.27 (2015-07-31)

  • Removed scripts in bin directory and placed them in the xstools directory.
  • Added entrypoints to generate executables for the XSTOOLs scripts.

v0.1.26 (2015-06-06)

  • Changed distribution to use readthedocs for documentation.

v0.1.25 (2015-06-05)

  • Fixed problem where flash and SDRAM couldn’t be accessed in gxstools because I appended ‘bitstream’ to the attribute names.

v0.1.24 (2015-03-16)

  • Modified usb2serial.py to prevent accidental triggering of serial BREAK.

v0.1.23 (2015-02-03)

  • Modified usb2serial.py and xscomm.py to support new serial BREAK command.
  • Added .cmd file to initiate each XSTOOLs script in a Windows command window.

v0.1.22 (2015-01-26)

  • Modified usb2serial.py to support non-ZPUino use of the USB-to-serial server.

v0.1.21 (2015-01-07)

  • Modified setup.py so pyusb < 1.0.0b1 is installed as a dependency since the newer 1.0.0bX libraries cause a problem with finding XESS boards on USB ports.

V0.1.20 (2014-12-17)

  • Modified setup.py to include microcontroller firmware hex files for the XESS boards.

V0.1.19 (2014-12-12)

  • Modified setup.py so pyusb <= 1.0.0b1 is installed as a dependency since the newer 1.0.0b2 library causes a problem with finding XESS boards on USB ports.

v0.1.18 (2014-12-10)

  • Fixed query for XESS USB devices which failed for some USB libraries.

v0.1.17 (2014-11-06)

  • Fixed handling of XuLA/XuLA2 boards with old firmware or with the USB-to-JTAG path disabled.

v0.1.16 (2014-10-27)

  • Added command-line and GUI methods for setting/getting flags in XuLA/XuLA2 boards.
  • Enabled loading of .bit files into serial configuration flash via gxstools.
  • Updated hex file to newest version of the PIC 18F14K50 firmware.
  • Added USB-to-serial bridge server between XuLA board and virtual comm port on PC.

v0.1.15 (2014-05-16)

  • Added support for upload/download of signed integers to memio methods.

v0.1.14 (2014-05-05)

  • Fixed FPGA bitstreams to remove errors during SDRAM upload/download.

v0.1.13 (2014-04-09)

  • Add bidirectional communication channel between host and FPGA: xscomm.py.

v0.1.12 (2014-02-03)

  • Added graphical front-end to XSTOOLs: gxstools.py.

v0.1.11 (2014-01-03)

  • Fixed bit direction for checking status bits in xsi2c.py.

v0.1.10 (2013-11-20)

  • Added support for XuLA2-LX9 board.

v0.1.9 (2013-05-15)

  • Added ability to load Xilinx bitstream files directly into serial configuration flash.
  • Fixed byte order of addresses sent to the W25X serial flash.

v0.1.8 (2013-05-14)

  • Fixed FlashDev class so address bounds could not go outside the min/max addresses for the device.

v0.1.7 (2013-05-11)

  • Added FlashDevice class for reading/writing flash memory devices.
  • Made Pic18f14k50 class inherit from the FlashDevice class for flash read/write operations.
  • Added routines for reading/writing serial configuration flash on the XuLA and XuLA2 boards.
  • Extended xsload.py to enable serial flash uploading and downloading.

v0.1.6 (2013-04-30)

  • Fixed xsusbprg.py so it works under linux.
  • Fixed USB read/write timeouts so they are dependent upon the amount of data transferred.
  • Replaced exit() with sys.exit() in scripts.

v0.1.5 (2013-04-19)

  • Added XuLA firmware .hex files for use with xsusbprg.py.
  • Fixed xsusbprg.py so it would upgrade XuLA board firmware by default.
  • All user-accessible scripts now use xstools_defs.py to get a unified version #.
  • Added .rules file for USB connections to XESS boards.

v0.1.4 (2013-04-01)

  • Replaced bitarray module with pure-Python bitstring module.

v0.1.3 (2013-02-15)

  • Fixed so multiple XsUsb objects can share a single USB link to access an XESS board.

v0.1.2 (2013-02-14)

  • Changed CR-LF EOL in .py files to LF EOL so linux wouldn’t barf.

v0.1.1 (2013-01-23)

  • Use pypubsub instead of wxpython for publish/subscribe communications.

v0.1.0 (2013-01-06)

  • Initial release.